Mount + Mount XL Collection
Mount is a bold landscaping statement. The minimal box leg is perfect for supporting huge section timbers for a rustic, natural look, and can be accessorised with armrests, back supports, tables and more.
Mount seating products are available as ‘Felled’ on Mount XL or ‘Hewn’ to allow you to choose the weight of the timber and visual impact on your site (we can also offer mount with the smaller ‘Sawn’ timbers to reduce weight and cost, but we think it looks a bit disproportionate!).
Mount can also be mitred, allowing you to follow the profile of other landscaping elements like walls and planters. We can manufacture Mount as a Radial seat too, allowing freeform curves and tree seats.
Installation:
Surface-mounted via 2x Max. M10 fixings per leg as standard.
Dimensions:
Units are shown below as 1800mm standard length but can be adapted to suit.
Standard Materials + Finishes:
Weathering Steel, supplied unoxidised to moderately oxidised
Also available as galvanised or polyester powder-coated steel
Sapele hardwood
Untreated
All fixings min. A2 stainless steel
Alternatives to all materials available on request
-

Mount Bench - Hewn
Dimensions: 1800 × 588 × 450
Weight: 121.8 kg
Impact: 289.88 kgCO2e -

Mount Bench with Arms - Hewn
Dimensions: 1800 × 588 × 650
Weight: 130.5 kg
Impact: 312.35 kgCO2e -

Mount Seat - Hewn
Dimensions: 1800 × 588 × 770
Weight: 139.8 kg
Impact: 314.38 kgCO2e -

Mount Seat with Arms - Hewn
Dimensions: 1800 × 588 × 770
Weight: 150 kg
Impact: 360.76 kgCO2e -

Mount Cube - Hewn
Dimensions: 588 × 588 × 450
Weight: 55.1 kg
Impact: 167.53 kgCO2e -

Mount Lounger - Hewn
Dimensions: 1530 × 700 × 950
Weight: 156 kg
Impact: 329.18 kgCO2e -

Mount Picnic Set - Hewn
Dimensions: 1800 × 1550 × 800
Weight: 287 kg
Impact: 966.25 kgCO2e -

Mount Radial Bench - Hewn
Dimensions: LWH to spec
Weight: 56.15 kg/lm
Impact: 135.53 kgCO2e/lm -

Mount Radial Seat - Hewn
Dimensions: LWH to spec
Weight: 74.6 kg/lm
Impact: 161.4 kgCO2e/lm -

Mount Tree Seat - Hewn
Dimensions: LWH to spec
Weight: - kg
Impact: - kgCO2e -

Mount XL Bench - Felled
Dimensions: 1800 × 400 × 450
Weight: 273.5 kg
Impact: 326.27 kgCO2e
Mount XL
Create your own monolithic Mount XL bench/seat with standard or bespoke accessories including tables, perches and device charging points.
While we offer our extra large ‘Felled’ section as standard, we need you to demand the use of reclaimed marine or architectural timbers, and can adapt all of our steelwork to suit what’s available. Let’s get another 100 years out of that tree!
(Note that we will advise either a matching or contrasting polyester powder coat finish on accessories where weathering steel has been specified for the legs to avoid direct contact with the oxide patina.)